問題詳情
Man’s knowledge of metals has been a very important (36) to mastering his environment. Very earlyin history, man learned how to make use of (37) metals such as gold and silver, but they are(38) be madeinto tools. The first important metal used (39) tools and weapons was bronze, a (40) of copper and tin.
36.
(A) helping
(B) aid
(C) use
(D) style
36.
(A) helping
(B) aid
(C) use
(D) style
參考答案
無參考答案
內容推薦
- Saying thank you to others ______basic manners in our society.(A) are (B) is (C) will be (D) doe
- Because Sam wanted to show off his new car, he drove so fast _________ he bumped intoother cars.
- I’m still hungry. Mom, may I have _____rice and fried chicken?(A) more (B) little (C) much (D) b
- The only ______for membership is driver’s license.(A) precedent (B) priority (C) prejudice (D) p
- Parents should ______a desire to learn for their children.(A) cultivate (B) plant (C) plow (D) e
- After many years of hard work, he finally got his idea_______.(A) off the ground (B) in a minute
- Sue’s pen pals didn’t write for a long time. She has not ______ them since last May.(A) listenin
- The doctor forgot which part of the drawers he put the files, so he had to _______ all thedrawer
- Close to the finish line, Jeff got a(n)_____of energy and ended up finishing first.(A) raise (B)
- All the fish died because the river was_______ by the large chemical company.(A) comprised (B) r
內容推薦
- A 0 kΩ resistor and an initially uncharged 0 μF capacitor are connected in series to a 12 V
- A 3 μF capacitor is connected in series with a 6 μF capacitor. When a 300 V potential difference
- 如下圖所示之桁架,求桿件 CE 之軸力為何? (A) 6 kN (壓力) (B) 6 kN (拉力)(C) 8 kN (壓力) (D) 8 kN (拉力)
- A current loop freely rotates in a uniform magnetic field (B = 0.50 T). The maximum torque on th
- 一滑車作直線運動,在時間 t=0 s 時的速度為 5 m/s,方向向東;t=5 s 時的速度為 10 m/s,方向向西,則此滑車在 t=0~5 s 期間的平均加速度為下列何者?(A) 1 m/
- 如下圖所示之桁架,受外力 P 作用,其內力為零的桿件共有幾根? (A) 5(B) 4(C) 3(D) 0
- 有關材料之冷加工與熱加工,其分界溫度為何?(A)回復溫度 (B)淬火溫度 (C)再結晶溫度 (D)晶粒成長溫度
- 金屬材料在冷加工時,隨著加工程度的增加,會產生材料強度增加的現象,下列何者符合上述說明?(A)細晶強化 (B)應變強化 (C)固熔強化 (D)析出強化
- 洛氏硬度試驗中,有關洛氏B級(HRB)之敘述,下列何者正確?(A)施加負荷為60 kg (B)施加負荷為150 kg(C)壓痕器為鑽石圓錐 (D)壓痕器為1/16英吋鋼珠
- 一標距內截面為25 cm2之鋁合金拉伸試棒,經拉伸破斷後,量取破斷面截面積為15 cm2,試問該鋁合金的斷面收縮率為多少%?(A)20(B)40(C)60 (D) 80
- 在拉伸試驗中,使材料呈現永久變形所需之最小應力為何?(A)潛變強度 (B)抗拉強度 (C)疲勞強度 (D)降伏強度
- 下列何種反應屬於共晶反應?(式中L為液體,α、β、γ分別為固熔體)(A) L→α+β (B) L+α→β (C) γ→α+β (D) γ+α→β
- 硫在鋼中屬有害元素,會降低鋼的韌性,下列何種元素最可降低由硫引起的熱脆性?(A)錳 (B)碳 (C)矽 (D)磷
- 矩形斷面梁,已知梁內最大剪力為 V,其最大橫向剪應力發生在矩形斷面之何處?(A)上邊緣 (B)下邊緣 (C)中立軸 (D) 4 個角隅處
- 雪明碳鐵在常溫時具有磁性,但隨溫度上升,其磁性會慢慢減少,溫度上升至210 oC便失去磁性,此變態為何?(A) A0 變態 (B) A1 變態 (C) A2 變態 (D) A3 變態
- 工程應用上,鋼的含碳量約為多少%?(A) 0.02以下 (B) 0.02 ~ 2 (C) 2 ~ 4 (D) 4 ~ 6
- 恆溫變態曲線圖之縱軸與橫軸分別代表何者?(A)溫度與組成 (B)溫度與時間 (C)溫度與變態速率 (D)溫度與變態百分率
- 碳鋼中的含碳量愈低,其S曲線將如何移動?(A)愈向上移 (B)愈向下移 (C)愈向左移 (D)愈向右移
- A magnetic field is directed out of the page. Two charged particles enter from the top and take
- 碳鋼常用之熱處理,下列敘述何者有誤?(A)正常化是指材料加熱後在空氣中冷卻,可使結晶組織細緻(B)淬火是將材料加熱後在油中急冷,而得到雪明散鐵組織使之硬化(C)當鋼在爐中冷卻時,其組織為粗波來
- 金屬材料於製程中,使用熱處理的最主要目的為何?(A)結合材料 (B)改變材料的形狀(C)改善產品的表面粗糙度 (D)改變材料的機械性質
- 有關18-8不銹鋼之敘述,下列何者有誤?(A)常溫下沒有磁性 (B)常溫下為沃斯田鐵組織(C) Ni含量約為18 % (D)典型的為SUS304不銹鋼
- 高速鋼中6-6-4-2型之鉬系高速鋼,其主要元素成分與含量比率與下列何者最接近?(A)含鎢6 %、鉬6 %、釩4 %、鎳2 % (B)含釩6 %、鉻6 %、鈷4 %、鎢2 %(C)含鉻6 %、
- 在鐵碳平衡圖中,共晶點之含碳量約為多少%?(A) 0.8 (B) 0 (C) 3 (D) 7
- 高速鋼的淬火溫度約為多少 oC?(A) 1000 (B) 1300 (C) 1600 (D) 2000