問題詳情
48. What does Nick Gregory feel sorry for?
(A) He did not drive to their house.
(B) He did not learn how to cook.
(C) The evening ended too quickly.
(D) He has never been to Italy.
(A) He did not drive to their house.
(B) He did not learn how to cook.
(C) The evening ended too quickly.
(D) He has never been to Italy.
參考答案
無參考答案
內容推薦
- 【題組】32 (A) After all (B) In a word (C) So far (D) In a sense
- 【題組】34 (A) fill out (B) write down (C) find out (D) pick up
- 【題組】Which of the following is a negative effect of TV violence mentioned in the passage?(A) Murd
- 【題組】Which of the following best describes the organization of the passage?(A) Description in chr
- 四、閱讀測驗 Is there too much violence on TV? Every day and every night there is a murder on the tube
- No one was more _______by the performance than I.(A) impressed (B) interested (C) intensified (D
- Man’s knowledge of metals has been a very important (36) to mastering his environment. Very earlyin
- I told you not to leave your toys lying_______ the living room. They just make a big messfor me
- 三、克漏字測驗【請依照段落上下文意,選出最適當的答案】 Unlike the old days, if people have questions today, they just look
- I couldn’t help but _______at the woman’s bizarre clothing as she walked in.(A) staring (B) star
內容推薦
- 碳鋼中的含碳量愈低,其S曲線將如何移動?(A)愈向上移 (B)愈向下移 (C)愈向左移 (D)愈向右移
- A magnetic field is directed out of the page. Two charged particles enter from the top and take
- 碳鋼常用之熱處理,下列敘述何者有誤?(A)正常化是指材料加熱後在空氣中冷卻,可使結晶組織細緻(B)淬火是將材料加熱後在油中急冷,而得到雪明散鐵組織使之硬化(C)當鋼在爐中冷卻時,其組織為粗波來
- 金屬材料於製程中,使用熱處理的最主要目的為何?(A)結合材料 (B)改變材料的形狀(C)改善產品的表面粗糙度 (D)改變材料的機械性質
- 有關18-8不銹鋼之敘述,下列何者有誤?(A)常溫下沒有磁性 (B)常溫下為沃斯田鐵組織(C) Ni含量約為18 % (D)典型的為SUS304不銹鋼
- 高速鋼中6-6-4-2型之鉬系高速鋼,其主要元素成分與含量比率與下列何者最接近?(A)含鎢6 %、鉬6 %、釩4 %、鎳2 % (B)含釩6 %、鉻6 %、鈷4 %、鎢2 %(C)含鉻6 %、
- 在鐵碳平衡圖中,共晶點之含碳量約為多少%?(A) 0.8 (B) 0 (C) 3 (D) 7
- 高速鋼的淬火溫度約為多少 oC?(A) 1000 (B) 1300 (C) 1600 (D) 2000
- 一般而言,在鑄鐵的所有成分中,最為影響鑄鐵性質的元素是碳與下列何者?(A)矽 (B)硫 (C)磷 (D)錳
- 大型鑄件為了避免鑄造後所產生的變形或破裂,會將鑄件長時間放置在室外,以自然方式退火,慢慢消除內應力,此種處理方式為何?(A)退火 (B)回火 (C)軟化 (D)季化
- 鋁合金析出熱處理的最主要目的為何?(A)析出粗大之析出物 (B)增加合金之導電率(C)增加合金之強度 (D)提高合金之熔點溫度
- 黃銅與青銅主要是在銅中分別加入下列何種金屬元素?(A)錫與鋁 (B)錫與鉛 (C)鋅與鉛 (D)鋅與錫
- 一槓桿支點在中央,此槓桿均分為六等分,以細繩吊掛 3 個重量均為 w1 的星形金屬塊與 2 個重量均為 w2 的鐘形金屬塊,此時槓桿保持水平平衡,吊掛位置如圖(二十)所示。若槓桿、細繩的重量與
- 下列何者常稱巴氏合金,並適用於高速度、高荷重軸承的材料?(A)錫基軸承合金 (B)鋁基軸承合金 (C)鋅基軸承合金 (D)鉛基軸承合金
- 依CNS規範,S45C係指下列何者?(A)含碳量為0.45 %的碳鋼 (B)最小抗拉強度45 N/mm2的碳鋼(C)最小抗拉強度45 kgf/mm2的碳鋼 (D)最小洛式硬度為45 HRC的碳
- 關於SAE3125材料之編號,下列敘述何者有誤?(A) SAE是美國汽車工程學會標準的簡稱(B)第1個數字表示鋼的種類,而3是指鎳鋼(C)第2個數字表示主要合金元素之大約成分(D)第4個數
- In X-ray spectrum, which of the following statements is correct?(A) The electron beam is acceler
- Carbon monoxide is commonly used to reduce ores to produce free metals and carbon monoxide is co
- In radioactive decays, which of the following statements is incorrect?(A) The energy, momentum,
- 一凸輪軸的旋轉週期為0.5 sec,則此凸輪軸的轉速為多少rpm?(A) 0.5 (B) 2 (C) 5 (D) 120
- 使用螺旋起重機,舉起3140牛頓重之物體,起重機手柄半徑為50 cm,螺旋為雙線螺紋,螺距為4 cm,假設不計摩擦損失,則舉起該物體應施力多少牛頓?(A) 10 (B) 20 (C) 40 (
- 一螺栓規格之標註為M10 ൈ 5 ൈ 40。有關此螺栓之說明,下列何者正確?(A)外徑為10 mm (B)公稱直徑為40 mm (C)螺距為10 mm (D)螺栓長度為10 mm
- 有一方鍵安裝於圓軸上,鍵長為 20 mm,鍵寬為圓軸直徑的 1/4 倍,該方鍵的容許壓應力為40 N/mm2,當圓軸受 20 N-m之扭矩,若僅考慮方鍵的壓應力,則鍵寬至少應為多少 mm?(A
- Which of the following is the correct order of boiling points for KNO3, CH3OH, C2H6, and Ne?(A)
- 已知一鍵之寬、高、長分別為20 mm,裝於直徑40 mm之軸上,若鍵的受力為4000 N,則有關該鍵所承受的應力,下列何者正確?(A)壓應力40 N/mm2(B)壓應力20 N/mm2